阿凡达2:金沙注册-金沙官网登录注册

金沙注册

      

      金沙登录平台金沙注册

      金沙官网手机下载app

      金沙注册

      • Specifications
      • Features & Benefits
      Engine   DCEC 6CTA8.3-C230
      Rated Power (kW) 172(230)@2200
      Blade Width mm(inches) 4270(168)
      Maximum Speed km/h (mph) 41.5 (25.8)
      Draw Bar Pull (kN) 90
      Operating Weight kg(Lb) 16500(36376)
      ENGINE
      Tier   II
      Make   Dongfeng Cummins
      Gross Power kW(Hp)@rpm 172(230)@2200
      Net Power kW(Hp)@rpm 155(208)@2200
      Peak Torque   2
      Torque Rise %   34%
      Number of Cylinders   6
      Aspiration   turbocharged
      TRANSMISSION
      Transmission Type   power shift
      Transmission Configuration   6f/3r
      Torque Converter   three-member single turbine
      Maximum Travel Speed, fwd (km/h) 41.5 (25.8)
      Maximum Travel Speed, rev (km/h) 25.6 (15.9)
      Number of Speeds, fwd   6
      Number of Speeds, rev   3
      AXLES
      Front Axle Make   LiuGong Weld axle
      Rear Axle Make   Meritor
      Differential Type   No-spin limited slip standard
      Final Drive Type   chain drive
      Axle Oscillation   ±15°
      Front Axle Type   all welded steel frame
      Front Axle, Wheel Lean Angle   ±17°
      STEERING
      Steering Configuration   load sensor steering gear
      Steering Relief Pressure (Mpa) 17
      Minimum Turning Radius (inches) 8000(315)
      Steering Angle   ±45°
      Frame Articulation Angle   ±20°
      BRAKES
      Service Brake Type   (Dry)shoe
      Service Brake Location   rear axle only
      Service Brake Actuation   hydraumatic
      TIRES
      Tire Size   17.5-25 PR12/L3
      HYDRAULIC SYSTEM
      Main Pump Type   gear
      Main Relief Pressure (Mpa) 18
      Pilot Pump Flow L(Gal)/min 126(33)
      WORKING CAPACITIES
      Maximum Draw Pull (kN) 90
      Cutting Pressure kg(Lb) 8100(17857)
      TANDEM DRIVE PERFORMANCE
      Height mm(inches) 600(24)
      Width mm(inches) 210(8)
      Thickness, inner wall / outer wall mm(inches) 20/20(0.8/(0.8)
      Center Distance mm(inches) 1538(61)
      Oscillating Angle   ±15°
      MOLDBOARD PERFORMANCE
      Bank Cut Angle   40~70
      Moldboard Lift Above Ground mm(inches) 405(16)
      Moldboard Side Shift, right / left mm(inches) 725/675(29/27)
      Maximum Sloping Angle   90°
      Cutting Depth mm(inches) 600(24)
      Circle Rotation   360°
      Circle Diameter mm(inches) 1455(57)
      Circle Thickness mm(inches) 140(6)
      DIMENSIONS
      Wheelbase mm(inches) 6230(245)
      Overall Length mm(inches) 8971(353)
      Overall Height with Cab   3438(135)
      Overall Width mm(inches) 2600(102)
      Clearance under Front Axle mm(inches) 645(25)
      Moldboard Standard Length mm(inches) 4270(168)
      Moldboard Standard Thickness mm(inches) 19(0.7)
      Moldboard Standard Height mm(inches) 650(24)
      OPERATING WEIGHTS
      Operating Weight kg(Lb) 16500(36376)
      On Front Wheels kg(Lb) 4700(10362)
      On Rear Wheels kg(Lb) 11800(26015)
      SERVICE CAPACITIES
      Fuel Tank L(Gal) 230(61)
      Engine Oil L(Gal) 22(6)
      Cooling System L(Gal) 45(12)
      Hydraulic Reservoir L(Gal) 186(49)
      Transmission And Torque Converter L(Gal) 45(12)
      Tandems, Each L(Gal) 28(7)
      • Built for Efficiency
          Wide Range of Motion
          Fuel Efficient DongfengCummins Engine
          LiuGong Suction Cooling System
      • Easy to Maintain
          Easy Engine Access
          Convenient Maintenance Ports
          Hydraulic Pipes of Both Sides
      • Always Reliable
          High Torsion
          World Class Components
          Parts, Service, and Attachments to Count on
      • Operator Comfort and Safety
          Adjustable Seat and Steering Colum
          Ergonomically Designed
          ROPS/FOPS Cab
          Low Vibration, Noise, Dust +UV Resistant
      WWW.LIUGONG.COM  ©2009-2011 Liugong Machinery Co., Ltd.All Rights Reserved
      Dealer Login | Legal Notice | 联系 Us | Sitemap
          金沙官网手机下载app31474215629
          baiduxml 金沙官网